Test cricket has been played since 1877, and in all that time only three bowlers have taken all ten wickets in a single innings. Nine wickets in an innings is a little less rare, but it still happens so seldom that each case is remembered by name, ground and year. This article looks at the bowlers who reached these marks, how they did it, and why the feat is so hard to repeat in the modern game.

Why nine or ten wickets in one innings is so difficult

A Test innings ends after ten wickets fall. For one bowler to take nine or all ten, almost everything else has to go his way. The bowler at the other end must keep missing out, fielders cannot run anyone out, and the captain has to keep the same bowler on for very long spells. Because of this, the record depends on skill, stamina and a fair amount of luck. A run out, for example, is never credited to a bowler, so a single direct hit from the deep can end the chance of a ten-wicket haul.

Pitch conditions matter too. Most of the great innings figures came on surfaces that offered turn, which is why spinners dominate the list. A spinner can bowl long spells without tiring the way a fast bowler does, and a turning pitch keeps every batter under pressure.

The three bowlers with ten wickets in an innings

Jim Laker, England, 10/53 against Australia, 1956

At Old Trafford in Manchester, England off spinner Jim Laker took 9/37 in Australia’s first innings and then 10/53 in the second. His match figures of 19/90 are still the best in Test history, seventy years later. No other bowler has come close to nineteen wickets in one Test.

Anil Kumble, India, 10/74 against Pakistan, 1999

Forty-three years after Laker, India leg spinner Anil Kumble became the second bowler to take all ten. He did it in Pakistan’s second innings at the Feroz Shah Kotla in Delhi, and his spell won the match for India.

Ajaz Patel, New Zealand, 10/119 against India, 2021

The third member of the club is New Zealand left-arm spinner Ajaz Patel. Born in Mumbai, he took all ten wickets in India’s first innings at the Wankhede Stadium in Mumbai in December 2021, a remarkable story of a player making history in the city of his birth.

Notable nine-wicket innings

Nine wickets in an innings has been achieved a handful of times. The list below is not complete, but every entry is a well recorded performance:

  • George Lohmann, England, 9/28 against South Africa at the Old Wanderers, Johannesburg, 1896. This was the first nine-wicket innings in Test cricket and it remains the cheapest.
  • Jim Laker, England, 9/37 against Australia at Old Trafford, 1956, in the same match as his ten-wicket innings.
  • Richard Hadlee, New Zealand, 9/52 against Australia at the Gabba, Brisbane, 1985.
  • Muttiah Muralitharan, Sri Lanka, 9/65 against England at The Oval, London, 1998.
  • Muttiah Muralitharan, Sri Lanka, 9/51 against Zimbabwe at Kandy, 2002.

Richard Hadlee: the fast bowler among the spinners

Almost every innings on these lists belongs to a spinner. The clear exception is Richard Hadlee. His 9/52 at Brisbane in 1985 is one of the finest spells ever bowled by a fast bowler, and it set up a famous New Zealand win in Australia. Hadlee also took a catch in that innings, which is why he finished with nine wickets rather than ten.

Muttiah Muralitharan: twice in four years

Muralitharan is the only bowler in the list above with two nine-wicket innings. His 9/65 at The Oval in 1998 came on a dry pitch where he bowled England out almost alone, and his 9/51 at Kandy in 2002 showed the same control on home soil. He finished his career as the leading wicket-taker in Test history.

What about Bangladesh?

No Bangladesh bowler has yet taken nine wickets in a Test innings. The country’s best innings figures in Tests belong to left-arm spinner Taijul Islam, with 8/39 against Zimbabwe. Bangladesh fans following the current tour of South Africa can read Bangla match coverage on 9wicket cricket, which also keeps a full Bangla page on the best bowling records in a Test innings.

Could it happen again?

Modern Test cricket offers fewer chances for long, uninterrupted spells. Teams rotate bowlers more, use data to plan short bursts, and play on a wider range of pitches. Fielding standards are also higher, which means more run outs and more catches that could go to any bowler. Still, Ajaz Patel’s ten in 2021 proved that the record is not closed. A long spell on a turning pitch, a tired batting line-up and a captain willing to keep one bowler going is all it takes.

Where to follow cricket and football in Bangla

Readers in Bangladesh often want simple guides in their own language. Our partner sites cover different needs: 9wicket hub focuses on football schedules and player profiles, 9wickets guide explains account safety in plain English, nine wickets publishes short Bangla explainers for beginners, and 9wickets agent keeps a general information page for new users.

Quick facts

  • Best innings figures in Test history: Jim Laker, 10/53, 1956.
  • Best match figures in Test history: Jim Laker, 19/90, 1956.
  • Ten-wicket innings: Laker (1956), Kumble (1999), Patel (2021).
  • First nine-wicket innings: George Lohmann, 9/28, 1896.
  • Best innings figures for Bangladesh: Taijul Islam, 8/39.

Final thoughts

Records like these are a reminder of why Test cricket still matters. Over five days, a single bowler can change a match and write a line in history that lasts for generations. Whether it is Laker in Manchester, Kumble in Delhi or Patel in Mumbai, each of these spells was built on patience, accuracy and the ability to keep going when the batting side had no answer.

Categorized in:

Sports,

Last Update: November 22, 2026